Time Signal | Timer & Alarm
Time Signal User Manual
Instructions based on the labels implemented in the app.
![]()
First launch and alarm permission
- Open the app and choose a tab.
- When you first start or schedule an alarm, iPhone may ask to allow Time Signal to use alarms.
- If permission is unavailable, features that need an alarm cannot start. Review the Time Signal alarm permission in iPhone Settings to change it later.
The appearance and behavior of alerts on the Lock Screen can vary with iOS version, Focus, and device settings.
Timer
- On the Timer tab, choose “Add Timer” and set a duration, an optional name, and an alarm sound.
- Select “Start timer” on the product card to start it.
- Use “Pause” and “Resume” when they are available, or “Stop timer” to stop it.
Clock Alarm
- On the Alarm tab, choose “Add alarm.”
- Set a time, repeat setting, and sound. Choose “Once,” “Daily,” “Weekdays,” “Weekends,” or “Specific Date & Time.”
- With “Weekends,” the alarm repeats at the selected time every Saturday and Sunday. After saving, the next scheduled date and time is shown.
- With “Specific Date & Time,” choose a future date and time with the iOS date and time picker. The alarm sounds once at that selected date and time; past or invalid dates cannot be saved. The selected date and time is retained in saved settings and presets, and the next scheduled date and time is shown after saving.
- For a one-time alarm, the app shows the next scheduled date if today’s selected time has already passed.
- Use the on/off control on the card to start or stop the alarm.
Interval Timer
- Open the Interval tab and choose “Interval Timer.”
- Select “Add Interval Timer”, then set the interval, number of alerts or “Until stopped,” and a sound.
- Start the product to receive alerts at that interval.
Number of alerts (Version 1.1.0 and later)
You can set an Interval Timer to repeat from 1 to 540 times. If you enter a number greater than 540, the app asks you to change it.
If you choose “Until stopped”, the timer does not automatically stop after 540 alerts. It prepares upcoming alerts as it runs, but alerts may stop unexpectedly depending on your iPhone’s condition.
Interval Alarm
Even after the scheduled start time has passed, you can turn on the Interval Alarm before the end time to receive alerts during the remaining scheduled period.
- Open the Interval tab and choose “Interval Alarm.”
- Set a start time, end time, interval, and sound, then choose “Start Interval Alarm.”
- Turn the Interval Alarm fully off before saving changes. If it is still stopping, wait and try saving again.
Number of scheduled alarms (Version 1.1.0 and later)
You can schedule up to 540 alerts in total across your Interval Alarms. Some alarms saved in earlier versions of the app may also count toward this limit.
If you reach the limit, try shortening the time range, increasing the interval, or turning off Interval Alarms you no longer need.
When switching between Interval Alarms, make sure the previous alarm is fully turned off before turning on the next one.
Step Timer
A Step Timer lets you use several timers with different durations in sequence. For example, you can repeat “30 seconds of exercise → 10 seconds of rest” as one set. “Number of runs” is the number of times that complete set repeats.
Auto advance
Moves through every step automatically. In the detail view, you can choose the run and step where it starts.
Manual advance
Waits after each step. After stopping an alert, tap “Next” when you are ready to continue.
- On the Step tab, choose “Add Step Timer.” Set the name, duration, and alarm sound for each step, then add more steps if needed.
- Under “Rounds & common settings,” set the number of runs, total durations, pre-alert countdown, and “Common alarm sound” with its volume.
- For each step, choose “Use common setting” or “Set individually.” Steps using the common setting use the shared sound and volume; individually set steps keep their own settings.
- When stopped, you can choose where to begin in the detail view. Choosing a position does not start it.
- Tap “Start” to begin from the selected position. Editing and some actions may be unavailable while it is in use.
Manage timers, alarms, and saved settings
- Select a timer or alarm from the list to open it for editing when editing is available.
- Use “Save settings” in an editor to save the current settings.
- Swipe left on an item in the list to delete a timer or alarm you no longer need. Deleted settings cannot be restored.
- A timer or alarm that is in use may not be available for editing or deletion. Stop it first, then try again.
Sounds
You can use the sounds included with the app or sounds you add yourself for timers and alarms.
You can add a sound from “Files” on your iPhone. The original audio file stays unchanged.
To change an alarm sound, tap “Change Sound” and choose the sound you want. Choose 25%, 50%, 75%, 100%, 125%, or 150% for each sound. Your sound and volume settings remain when you close and reopen the app.
Each sound keeps its own volume setting. At 125% and 150%, some source audio may not become much louder in order to help prevent distortion.
When you tap “Test Actual Alarm Sound and Volume,” your selected alarm sound will play after 1–2 seconds at the same sound and volume as the actual alarm. This lets you check how it sounds before setting an alarm.
Alarm sounds in this app will play even when your iPhone is in Silent Mode.To prevent sound, select “Silence” in the alarm sound settings. No alarm sound will play when this option is selected.
To receive vibration-only alerts, select “Silence” as the alarm sound and enable haptics in Silent Mode in your iPhone’s settings. Vibration behavior depends on iPhone settings and iOS state.
A custom sound used by an active timer or alarm may not be available for deletion or volume adjustment.
Creating Custom Alarm Sounds
In “Create Alarm Sound” in Settings, you can make an alarm sound from audio you choose. While editing, use “Play” to check the sound.
- Open “Settings” from the gear icon on the main screen, then select “Create Alarm Sound.”
- Select “Choose File” or “Choose Video” to load audio.
- Use the left and right waveform handles to choose the part you want. You can zoom the waveform and fine-tune the selection in 0.1-second steps.
- Use “Play” to check the sound. You can also adjust the volume and the beginning and end of the sound.
- Give the sound a name, then choose “Save to Files” or “Save in App.”
- You can edit, rename, or delete saved sounds from the library.
- To use a sound you created for an alarm, open “Add Audio File” in Settings and choose “Choose from App Library.” Then select it with “Change Sound” in your timer or alarm settings. Saving a sound in the app does not automatically set it as an alarm sound.
While editing audio, tap “Play” to listen to it.
When you tap “Test Actual Alarm Sound and Volume,” the sound you are editing will play after 1–2 seconds at the same sound and volume as the actual alarm.
To hide ads while editing audio, tap “Hide ads” in the ad area. Your edits remain when you return from Ad Settings.
There is no 29-second limit while editing. To add a sound for alarms, use supported audio up to 10 MB. Audio longer than 29 seconds uses its first 29 seconds.
If you tap “Back” while edits are unsaved, the app asks whether to discard them. This does not delete sounds already saved in the library.
Ad settings
All features are free to use. You do not need to watch ads or make a purchase to access any feature.
If you do not want to see ads, you can hide them in the following ways.
Watch an ad to hide ads for one hour
Tap “Watch an ad to hide for 1 hour” and watch the ad to the end. Ads will be hidden for one hour from that time. If you close the app during that hour, the remaining time is kept. An ad may not be available while a timer or alarm is in use.
Hide ads permanently
Choose “Hide ads permanently” to permanently hide ads. If you have already purchased it, use “Restore Purchases” to restore it.
Ad privacy settings
If an ad-related choice screen appears, follow the on-screen instructions. To review or change your choices, use “Privacy settings”. See the Privacy Policy for details.
Appearance
In Settings, choose “Cat screen” or “Simple screen.” Both follow your iPhone light or dark appearance.
Lock Screen, data, and help
Alert and Live Activity presentation follows iOS and device settings. Settings, presets, appearance selection, and imported sounds are stored on the device. Device migration, backup restoration, and app deletion are handled by iOS; keep a separate record of important settings.
An alarm will not start.
Check whether iPhone allows MegtanTimer to use alarms. Follow the in-app guidance if a previous schedule is still stopping or needs attention.
Why can’t I edit an Interval Alarm?
Turn it off completely, wait for stopping to finish, then save the changes again.
“Unverified alarms” are displayed. (Version 1.0.9 and later)
If the Home screen shows “There are {count} unverified alarms”, tap “Review & remove.” An alarm you registered earlier may still be on your iPhone.
Review the list, then choose the alarms you no longer need and tap “Remove selected.” After reviewing every listed item, you can also use “Remove all verified.” Check the items carefully before removing them.
If an alarm cannot be removed, it is not shown as removed. Tap “Check again” to review the current state. If there are no unverified alarms, the warning and removal option do not appear.
What should I do if I reach the 540-alert limit? (Version 1.1.0 and later)
The app limits the number of scheduled Interval Alarm alerts. Turn off alarms you no longer need, or adjust the time range or interval.

